3-6 Axis Flocking Machine Control System (10" Screen)

Control function: 3-6 axes point movement, support interpolation A variety of acceleration and deceleration options: trapezoidal, S-type, exponential, cosine, to adapt to a variety of occasions Hole preview and real-time dynamic display of the machining path Featuring foot pedal, automatic...

Send Inquiry

Control function:

3-6 axes point movement, support interpolation

A variety of acceleration and deceleration options: trapezoidal, S-type, exponential, cosine, to adapt to a variety of occasions

Hole preview and real-time dynamic display of the machining path

Featuring foot pedal, automatic switch, fixture detection, electric eye color change, deceleration before color change, two-stage speed for the last hole, workstation switching anti-collision, hair patting, multiple workstation selection, electric eye wire feeding, and so on.

Back to zero back to the starting axis sequence settings, manual xa-axis yb-axis linkage and other types of flocking machine technology

A variety of pattern templates production parameters, greatly reducing the time to teach the hole position

When editing, there are many operations such as copy, split, pan, color, delete, insert, delete, etc. to facilitate data editing.

Added a lot of counseling commands, such as single circle drawing circle moment deletion and so on.

New U disk one-key update, the number of axes can be configured.

2-channel DA output

Supports various types of hand-held boxes (ZM5B for 9-frame serial communication, ZM5A for hand-cranking, and hand-held boxes for external homemade inputs).

IO:

Output type: all opto-coupler isolated, NPN open collector 5-24VDC, rated current 0.5A

Single-circuit maximum current up to 1A

Input type: all optocoupler isolated, input voltage: 12-24V

Hardware positive and negative limits for each axis, dots, and external buttons for stop and start (limit inputs can be set to be invalid as general purpose inputs)

ZM361-A01 (7-inch) 3-axis

ZM362-A01 (10-inch) 3-axis

ZM461-A01 (7-inch) 4-axis

ZM462-A01 (10-inch) 4-axis

ZM561-A01 (7-inch) 5-axis

ZM562-A01 (10-inch) 5-axis

ZM661-A01 (7-inch) 6-axis

ZM662-A01 (10-inch) 6-axis

ZM662-A02 (10-inch) 6-axis

(Configuration spindle with encoder feedback function)

Controllable axes: 3-6 axes

Interpolation motion