In five-axis simultaneous machining, a flat-bottomed end mill is used to maintain a vertical state for the complex mold processing surface, which can greatly reduce the processing time. The principle of the five-axis machining center is also suitable for side milling with angled surfaces, which can eliminate rib-like lines caused by ball end milling, making the surface quality of the mold more ideal, and reducing the need for cleaning the mold surface Increase the workload of manual milling and manual work.
Through the five-axis linkage machining technology, the problem of multiple debugging and clamping for the work piece to be repositioned at a complex angle is solved, not only shortens the time, but also greatly reduces the error generated. The large cost of fixtures has also been saved, and the machine tool has also achieved the processing of complex parts, such as the drilling, taper processing, and cavity recesses required for complex surfaces, which cannot be achieved by traditional methods. The tool used in five-axis simultaneous machining is shorter, and the whole part can be processed at one time. There is no need to re-install the card or use the longer tool required in the same three-axis machining. The production of the mold was completed in time, and the surface quality of the parts was also good.
Today’s content is shared with you here, the content is for your reference only! If you want to know more about the five-axis linkage related knowledge, please follow the Adtech five-axis linkage dispensing system manufacturer website (http://www.adtechcn .com/), we will update the content regularly; if you want to consult the five-axis linkage price, welcome to inquire or leave a message on the website, we will contact you in time, consultation hotline: 13828845315.