The fully automatic computerized tufting machine is more convenient to use, but many people do not know how to maintain it. The following is a simple list of the points we should pay attention to: the operator must often add lubricant to each moving part of the tufting machine , Brush Machine To reduce wear between machines.
The operator should regularly check whether the screws are loose, and if necessary, they must be tightened in time. Keep the guide rails and screw rods clean at all times to prevent debris from adhering to the guide rails or screw rods, Brush Machine thereby affecting the accuracy of the machine's work positioning. Make sure that the electric box works in a ventilated environment, avoid damp or high temperature environment, and prevent the electric box from violent vibration.
The electric box can not work in the environment of strong electromagnetic field, otherwise it may appear uncontrolled. The input power wiring must be correct (red, blue, and yellow wires are connected to 380 volt three-phase wires, green wire is connected to the neutral wire, and yellow-green interphase wire ground wire), pin numbers: 1, 2, 3 are 380V phase wires, 4 neutral wires , 5 ground wire. If the working voltage is stable, it must be maintained at AC380 ± 10V, because if too high a voltage is used, the electronic components may be burned.
It is forbidden to hit the touch screen with hard objects, as this will cause the sensitivity of the screen to decrease, and even severely break the glass screen. Do not pull the cable too hard. There is high-voltage electricity in the electrical box. When a fault occurs, Brush Machine non-professionals should not disassemble it to prevent electric shock or damage the system data.