In five-axis machining, the use of flat end milling cutter, the complex die machining surface to maintain a vertical state, can greatly reduce the processing time. The principle of five-axis linkage machining center, also suitable for side milling with Angle surface processing, can eliminate the rib-shaped grain caused by the ball end milling, making the surface quality of the mold more ideal, but also cut down the need to increase the manual milling and manual work because of cleaning the surface of the mold.

With five-axis linkage machining technology, the workpiece positioning need to be repeated again in complex Angle debug card issues are resolved, not only make time shortened, the resulting error is greatly reduced, when installing artifacts need jig the high expenses of savings, and machine tools did for complex parts processing, For example, the drilling, taper machining and cavity recess required for complex surfaces are not done by traditional methods.
The tool used in the five-axis linkage processing is shorter, but also can be a one-time processing of the whole part is completed, without again loading card or using the same kind of three-axis processing needs longer tool, can be completed in a short time to make the mold, and the quality of the surface of the parts is also better.

