The following steps can be used to check and confirm: is it used in continuous operation? The characteristics of the servo motor are not suitable for continuous operation. In this case, Servo Motor there will be a high temperature rise. Please re-confirm the operating requirements of the mechanism and re-evaluate the motor used.
Please confirm the frequency and period of action of the organization? If the frequency of the stop-and-go action is too high, the current may be reactivated before the pulse input stops for too short a time, so the temperature rise must be higher at this time. It is recommended that you can reduce the frequency of actions to improve the temperature rise problem.
Can the RUN current be reduced? When the torque is sufficient, Servo Motor reducing the RUN current of the driver will effectively reduce the temperature rise. However, if a larger current must be used due to the torque, it is recommended that you can replace the motor with a higher-grade motor and then lower the current to improve the temperature rise problem. Can the situation be improved by reducing the STOP current? If the holding force is sufficient, reducing the STOP current of the driver will effectively reduce the temperature rise when the motor stops. However, Servo Motor if you must use a larger STOP current due to the relationship between the stopping and holding force, it is recommended that you can replace the motor with a higher grade motor and then reduce the current to reduce the temperature rise problem.
What is the ambient temperature? Is it too high? Motor temperature = ambient temperature + motor temperature rise, so when the ambient temperature is higher, the temperature of the motor will be higher accordingly. It is recommended to install a heat dissipation panel or a heat dissipation fan to help dissipate heat. Please make sure that the wiring on the motor side is correct? Wrong phase connection will cause the jitter phenomenon of the motor running irregularly, Servo Motor and may also cause a problem of higher temperature rise.
If none of the above causes cause problems, the motor temperature should be normal in this case, and it is not overheated. Please measure the exact temperature of the motor directly with a thermometer. For our driver, because of the overheating protection function, if the temperature is too high, Servo Motor the protection function will be turned on, and the servo motor will be powered off at the same time, so that customers can use it more at ease.
