DJ1600V4 is composed of TV5600 handheld box + offline motion controller AMC1600P based on omc_v13 system, which communicates through serial port connection between the two, respectively, completes the work of the human-machine interface and motion control, IO port and other operations, is a set of split, full three-dimensional, high-precision five-axis linkage of special motion control system.
1. Maintain the best dispensing state of the applicator and improve the quality of dispensing.
2. The dispensing efficiency is significantly improved.
3. Effectively avoid glue gun interference.
- 4. Reduce the number of clamping times, and complete the five-sided processing at one time.
5. Shorten the production process chain and simplify production management.
6. Shorten the new product development cycle - AMC1600P is a pulsed six-axis controller previously developed by ADTECH based on IEC61131-3 programming standards, providing motion control instructions in accordance with PLCOpen, including Part1/2 functions and part Part4 functions, the latest addition of ADTECH RTCP fitting calibration algorithm, which can accurately calculate the axis direction and offset of the rotating axis through data processing in the measurement module.
- The system with RTCP is the true five-axis linkage dispensing.
- The DJ1600V4 system's RTCP keeps the center of the applicator in the programmed position at all times. In this case, the gun direction can be optimized during the entire path movement, while the gun is moved in a straight line. This maintains optimal dispensing status throughout the entire path.
- When programming, don't worry about the rotation axis movement and the length of the applicator, just consider the interpolation motion between the applicator and the workpiece. The rest of the work control system will be done for you.