Knowledge

What are the advantages of CNC five-axis processing center? The technology of the five-axis linkage machining center relieves the multiple debug card

What is the application of industrial robots in the automotive industry? 1. Spot welding work 2. Paint work 3. Automotive assembly work and filling

How to make six axis welding robot Inspection and maintenance daily.

The motor is an engine that controls the operation of mechanical components in a servo system. It is an auxiliary motor indirect transmission.

The servo controller is composed of two parts: a servo motor and a servo driver. Small AC servo motors generally use permanent magnet synchronous moto

The power cord specifications of the servo drive must match the motor capacity. The input power (primary side) of the driver of the larger power motor

Each type of servo motor has parameters such as rated torque, maximum torque and motor inertia in the specifications.

When the PLC performs the origin reset of the servo motor, which reset methods have higher repeating positioning accuracy?

The permanent magnet synchronous servo motor is developed from a wound synchronous motor. It replaces the electric excitation with a permanent magnet,

The surface permanent magnet structure has a small rotor diameter, low rotational inertia, large equivalent air gap,

There are two main ways to connect the direct drive servo motor to the load: one is a framed motor structure with a hollow shaft,

The servo drive motor is unstable and the speed is fast and slow. The main reasons for this failure are the following: the servo drive parameters are